1、 Identification process of release paper manufacturer's information:
The silicon coated Glasin release paper has the same standard and color as the general coated silicon release paper, and it is difficult to differ when it is placed on the desktop, and they also have the same release characteristics. But Glasin paper is made of high-pressure light, so the paper is more uniform and flat, and generally more transparent. So you just have to look at the transparency of these two similar papers against the bright light to see the difference between the evenness of the paper and transparency. It is really impossible to tear it with your hands, and it is PE coated paper that can see the film fragments.
2、 The difference between coated paper and release paper:
The appearance of glossy coated paper and release paper can sometimes be very similar. Release paper is used for die-cutting, but if they are torn open by hand, the paper usually only has fiber hairs at the torn edges, and coated paper also has some small membranes in addition to wooden fibers. If using adhesive tape for testing, there will be a noise when uncovering the adhesive tape on the coated paper, but nothing will stick to the tape, while glossy paper will stick to the coating and wood fibers on the surface of the paper.
3、 Identification process of coated paper data:
From the appearance, there is no difference between coated paper and plastic release paper coated with silicon of the same standard; And PE coated paper coated with silicon and general coated paper are also difficult to distinguish, but you only need to use a few simple tools and operations to distinguish their differences. With a piece of tape, a signature fountain pen, and a small hand tear paper experiment, plastic release paper and the same standard coated paper cannot be seen in appearance, but the above method can also distinguish the differences between them.